Table of Contents
Advertisement
2
.
2
.
3
D
H
C
P
M
2
.
2
.
3
D
H
C
P
M
DHCP allows a user to obtain an IP address automatically from a DHCP server on the Internet.
If you choose DHCP mode, the DHCP server of your ISP will assign a dynamic IP address for
VigorTalk ATA-24 SH automatically. It is not necessary for you to assign any setting. (Host
Name and Domain Name are required for some ISPs). S imply click Next to setup LAN
interface.
After setting up the Host Name and Domain Name for the WAN interface, the user can click
Next to setup the MGN interface continuously.
LAN – LAN IP/DHCP Page
IP Address
Subnet Mask
Status
Start IP
End IP
VigorTalk ATA-24 SH Series User's Guid
o
d
e
o
d
e
Assign an IP address for the LAN interface.
Assign the subnet mask for the LAN interface.
Click Enable to use DHCP server; click Disable to close
DHCP server; click Relay Agent to activate relay agent
function.
Assign the start IP address of the IP pool that DHCP server can
use for clients in LAN.
Assign the end IP address of the IP pool that DHCP sever can
use for clients in LAN.
e
14
Advertisement
Table of Contents
