Getting Started - Monessen Hearth Double Door VFCS20DNV Installation And Operating Instructions Manual

Monessen hearth unvented gas cast iron stove installation & operating instructions
Table of Contents

Advertisement

MAkE SURE YOU HAVE RECEIVED ALL PARTS:
Check your packing list to verify that all listed parts have been received. You should have the following:
• Cast Iron Stove with Burner Assembly
• Installation/Operating Instructions
• Ceramic Fiber Logs
• Touch-up Paint
Millivolt controlled heater designed to be operated with optional devices for ON/OFF functions.
• Hand-Held Remote with Manual Receiver
• Wall Switch with 15' Wire
Gloves are recommended when handling ceramic fiber logs to prevent skin irritation
from loose fibers. Logs are fragile — handle with care.
Carefully inspect the contents for shipping damage. If any parts are missing or damaged, immediately inform the dealer
from whom you purchased the appliance. Do not attempt to install any part of the appliance unless you have all parts
in good condition.
WHAT YOU WILL NEED FOR INSTALLATION:
You must have the following items available before proceeding with installation:
• External regulator (for propane/L.P.G.)
or high pressure natural gas (1 to 2 PSI system)
• Piping which complies with local codes
• Sediment trap (recommended)
• Pipe wrench or appropriate wrench set
58D6002
• Pipe sealant approved for use with propane/L.P.G.
(Resistant to sulfur compounds)
• Manual shutoff valve
• Tee joint
• Screwdrivers


Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents