Korg A1 Owner's Manual page 44

Page 2 of the
MIDI Menu
ENABLE and DISABLE
setting for MIDI Volume
control
Dumping MIDI System
Exclusive data
The "MIDI SETUP 2" page is for MIDI volume setting and the transmission of MIDI
exclusive data.
MIDI Volume data (CTRL07) can be used lo control effect volume at the effect Chain
location specified in the Volume Pedal Placement function (Program Utility Mode). In
this page it is possible to ENABLE or DISABLE this function. For example, you may
want to disable this "Global" function if you are using MIDI Volume data to control an
individual effect parameter with the Dynamic Modulation function.
1. With the "MIDI SETUP 1" page showing, press the PAGE UP key.
The display changes lo the "MIDI SETUP 2" page.
2. Rotate the "B" double function edit control to select ENABLE or DISABLE.
ENABLE: enables volume control by MIDI volume data.
DISABLE: disables volume control by MIDI volume data.
This procedure allows the dumping of the internal Programs and Map Play
program settings lo a MIDI data filer or directly to another A1. Before starting this
procedure, connect a MIDI cable from the MIDI OUT of the A1 to the MIDI IN of the
receiving device.
1. Press the PAGE + key to go from page [MIDI SETUP 1] to page 2 [MIDI
SETUP 2] of the MIDI Menu.
2. Press the "S" double function editor [DUMP] to begin transmitting MIDI
exclusive dump data.
Data is transmitted regardless of the ENABLE/DISABLE setting.
3. When the transmission Is completed, "COMPLETED" Is displayed.
4. Press the "H" double function edit control [EXIT] to return to the MIDI
SETUP 2 page.
Press the "H" double function edit control [EXIT] to return lo the GLOBAL UTILITY
MENU.