2/ Selecting And Editing A New Chain - Korg A1 Owner's Manual

2. Selecting and editing a new Chain
Selecting a Chain
The Following explains the procedure for selecting and editing an affect Chain.
1. In the Play Mode, select the program that you wish to edit.
(For this example select factory program I 99.)
2. Press the EDIT key
"EDIT SELECT" is shown on the display.
3. Press the PAGE+ key.
"CHAIN EDIT is shown on the display.
4. Press the "A" double function edit control below the Chain number.
The display will show the current Chain type (Series, Parallel, etc.) in the upper right.
5. Select a Chain by turning the "A" double function edit control or pressing
the UP/DOWN keys. (Select Chain 5 for this example.)
Chain Number
Chain 5 has three effects connected in Series. When a new Chain is selected, in the
Chain Edit Mode, they contain factory default effect selections.
Refer to the "Chain List" for details on each Chain.