Operating Instructions - Belling BMWO34 Instruction Manual

WARNING: Do not install oven over a range cooktop or other
heat-producing appliance. If installed near or over a heat
source, the oven could be damaged and void the warranty.

Operating Instructions

This microwave uses electronic controls to adjust cooking parameters
to achieve your desired cooking results.
Clock Setting
1) In standby mode, press "CLOCK/TIMER" once, "00:00:
displays. The hour figures will flash.
2) Turn
within 0—23.
3) Press "CLOCK/TIMER", the minute figures will flash.
4) Turn
within 0—59.
5) Press "CLOCK/TIMER" to finish clock setting. ":" will flash.
Note: 1) The clock will not set if the unit is not powered.
2) When setting the clock, if you press "STOP/CLEAR", you will
exit the clock setting function.
Microwave Cooking
1) Press "MICROWAVE" once, the screen will display "P100".
2) Press "MICROWAVE" once again or turn
Power from 100% to 10%, "P100 = 100%", "P80 = 80%", "P50 =
50%", "P30 = 30%", "P10 = 10%".
3) Press "Start/+30Sec/Confirm" to confirm, and the screen
displays "P80".
The accessible surface may be hot during
operation.
to adjust the hour figures, the input time should be
to adjust the minute figures, the input time should be
to select power.