CARINg fOR yOUR SUBwOOfER
The cabinet's wood veneer finish does not require routine maintenance.
Cabinet surfaces that have been marked with dust, fingerprints, or other
dirt can be cleaned using a soft cloth – preferably microfiber, and high-
quality auto wax. Take care not to come in contact with the transducer.
• Use caution to avoid contacting the rubberized trim on the top of
the loudspeaker with auto wax. If necessary, the rubberized trim
can be cleaned with denatured alcohol on a microfiber cloth.
To clean the grille, gently vacuum it using a soft-bristled brush vacuum
attachment with the vacuum cleaner set to the lowest possible suction.
CAUTION: To prevent cabinet damage, do not use metal
polish or a cloth made with steel wool to clean the
cabinet. To prevent possible transducer damage, do not
apply furniture polish directly to the cabinet.
SPECIfICATIONS
B112/B110
Type:
Low-frequency transducer:
Amplifier power:
Input sensitivity/impedance:
Crossover frequency:
Enclosure type:
Inputs:
Available finishes:
Dimensions (H x W x D):
B112:
B110:
Weight:
B112:
B110:
10
Powered subwoofer
Coated paper/pulp cone (12" – B112; 10" – B110) with 50mm two-layer copper voice coil,
vented triple-stacked ceramic 5 magnet assembly and vented die-cast aluminum frame
1,000 watts (RMS), 2,000 watts (peak)
400mV (full power)/20k ohms (balanced); 14k ohms (unbalanced)
50Hz – 200Hz, independent low-pass and high-pass 1st-, 2nd-, 4th-, 8th-order Butterworth,
4th- or 8th-order Linkwitz-Riley (factory-disabled, user-programmable with Revel LFO
programming software)
Sealed
Balanced (XLR); unbalanced (RCA)
Piano black; high-gloss genuine American walnut veneer
18-7/16" x 15-15/16" x 16-9/16" (468mm x 404mm x 420mm), with grille
16-7/8" x 14-5/16" x 13-7/16" (428mm x 364mm x 342mm), with grille
70.4 lb (31.9kg)
56 lb (25.4kg)
B112/B110 Subwoofer
Quick Start Guide