Phone Settings - Timer; System Log - Allnet ALL7960 User Manual

Activate
Phone Number
6.18 Phone Settings – Timer
NTP Recycle Timer
Inter Digit Timer
Originating Not Accept Timer
Incoming No Answer Timer
Hold Recall Timer
Auto Speaker Off Timer

6.19 System Log

Call Tracing Log keeps a record of all the phone activities. This log is used by our engineers to troubleshoot hardware
problems.
Enable/ Disable auto dial.
The phone number of auto dial.
NTP recycle time.
The time interval that the IP phone waits to detect the end of DTMF digits.
No more digits are accepted after this period and the phone begins to dial.
The time interval that the caller's phone waits to establish a call. If the
receiver fails to answer the phone during this time interval, the caller's
phone will automatically disconnect.
The time interval that the receiver's phone will ring. If the receiver fails to
answer the phone during this time interval, the phone will automatically
disconnect.
The time interval that the caller is put on hold before the phone
automatically disconnect.
The time interval that the speaker phone is on before turning off
automatically (due to inactivity).
33