Iax Settings; Stun&Upnp Settings - Allnet ALL7960 User Manual

6.10 IAX Settings

IAX Server
IAX Server Port
IAX Local Port
IAX Number / IAX Name / IAX
Username / IAX Password
IAX Refresh Interval (seconds)
Register Status
Note: Phone rebooting is necessary when any of the above settings is changed
6.11 STUN&UPnP Settings
NAT traversal is a challenge that all Service Providers looking to deliver public IP-based voice service must solve. The
challenge is to provide secure connection to subscribers behind NAT (Network Address Translation) devices and Firewalls.
Overcoming this traversal problem will lead to widespread deployment of profitable voice over IP service to any subscriber
with a broadband connection. Therefore, this IP Phone implements NAT traversal function for solving the Firewall and
NAT traversal problems.
The Asterisk server's IP address
The port number for the Asterisk server. Default is 4569
All7960 supports IAX2 protocol. Normally IAX2 uses Port 4569.
Number, name or password to log into the IAX server.
The time interval in which the phone periodically refresh IAX sessions
by sending repeated INVITE or Update request.
Shows register status.
29