Mitsubishi Electric WD-52525 Part Replacement Instructions page 4

MITSUBISHI INSTRUCTIONS: V26 CHASSIS REPLACEMENT
Chassis Removal
1) Remove the 2 screws (a) securing the chassis to the top base.
2) Remove 6 screws (b) securing the chassis to the bottom base and the left bracket.
3) Unplug the USB and 1394 connectors from the Chassis.
NOTE: In the V26++ chassis the Card Reader 1394 connector plugs into the Hard Drive Module.
4) Remove AC cord from notch
5) Carefully slide the chassis from the cabinet.
6) Remove cable tie.
Note: This cable tie can
be unlocked and reused.
(a)
Pull Tab
Mitsubishi Digital Electronics America, Inc
(b)
Page 2