Mitsubishi Electric WD-52525 Part Replacement Instructions page 12

MITSUBISHI INSTRUCTIONS: V26/VK26 ENGINE REPLACEMENT
Adjustments
1) DATA COPY Procedure
V26 Chassis: Press <MENU> <2-4-5-7> <0> Select "Copy Light Engine Data to DM", Press <ENTER>.
VK26 Chassis: DATA COPY procedure is not necessary.
2) The following adjustments may have to be performed after the installation. (see service manual)
• Horizontal and Vertical Electrical Centering Adjustment.
• Optical Unit Rotation Adjustment
• Optical Unit Keystone Adjustment
Repackaging - Important... Engines returned with damage due to improper packaging will
not receive credit.
1) Place the Lens Cap onto the original Optical Engine and place the Engine into the plastic bag.
2) Pack the Engine in the same manner the replacement was supplied, using all foam packing material.
Use Figure 4 as a reference.
Optical Engine in
Plastic Bag
Lamp Fan
Faces Up
Figure 4: Repackaging
Mitsubishi Digital Electronics America, Inc
Lens Cap on
Lens
DMD Heatsink
& Fan Fit Into
Cutout
Page 6