MITSUBISHI INSTRUCTIONS: V26/VK26 ENGINE REPLACEMENT
Removing the follolwing parts from the Optical Engine
•
DMD Heat Sensor
•
The Optical Engine bottom plate and black bracket
•
Lamp Housing Grill
DMD Heat Sensor Removal (Figure 1)
1) Remove screw (a) on the top of the DMD Fan.
2) Set the Heat Sensor aside to install on the replacement Optical Engine.
Bottom Plate & Black Bracket Removal
1) Remove the 4 screws (B) from the Bottom Plate (Figure 2)
2) Remove the two screws (c), holding the Black Bracket to the Lamp Box. (Figure 3)
Figure 1: DMD Heat Sensor
Bottom View
Figure 2: Bottom Plate
Mitsubishi Digital Electronics America, Inc
(a)
Heat Sensor
Bottom Plate
(B)
Page 4