Cleaning & Maintenance - Honeywell CL48PM Owner's Manual

Important - Please Read!
•
The cooler is supplied with Honeycomb Cooling Media.
•
The cleaning frequency for the Honeycomb media depends on local air and water
conditions. In areas where the mineral content of water is high, mineral deposits may
build up on the Honeycomb Cooling Media and restrict air flow. Draining the water
reservoir and refilling with fresh water at least once a week will help reduce mineral
deposits. If mineral deposits remain on the Honeycomb media, the media should be
removed and washed under fresh water. The media should be cleaned every two
months or sooner, depending on your needs."
•
Do not run the unit in COOL mode with stale water in the tank. Empty the tank and refill
it with fresh water if the water has been standing in the tank for an extended period of
time.
•
For best results, allow the Honeycomb Cooling Media to dry after each use by turning
off the cool function 15 minutes before turning the unit off.
WARNING
•
Before cleaning, turn the unit off and disconnect from the power source.
•
Use a damp cloth to remove dirt and dust from the outside of the unit.
•
Never use abrasive cleaners.
•
When the unit is not in use, store it in a dry place, out of direct sunlight.
CLEANING & MAINTENANCE
13