Kidde RemoteLync User Manual page 8

Operating Instructions
RemoteLync LED Indicator Operation
Mode
Startup – Wait for
Link status active
Enroll – Waiting
for setup button
press
Enroll - Registration
window open
Link lost after
enrollment
Smoke Learning
CO Learning
Standby
Test Mode – Step
1: Acoustic
Self-Test
Test Mode- Step
2: Alarm Test
Alarm Detected
Snooze mode
Ignore Mode
Fault Notification
8
Green Amber
Off Off
Off Off
Off Off
Off Off
Off 1 sec on/
1 sec off
Off 100 ms on/
1 sec off
On Off
On/Off On/Off
Once per Off
second
Off Off
Once Off
every
two
seconds
Once Off
every
5 seconds
Off On
Red
Blink twice per
second
On for 1 second,
off for 1 second
Flashes rapidly
(4 times a second)
Once per second
Off
Off
Off
On/Off
Off
Flashes rapidly
with a one second
pause.
Off
Off
Once per second
Comment
System will wait for
link status active before
going into standby
Wait for monitor to
direct user to press
button on monitor
Tap "enroll my
monitor" on app
Check status of
wireless router
Test Smoke alarm
Test CO alarm
Test monitor and
alarms weekly
Wait for Self-test to
complete, app will
show status.
Test alarm furthest
from monitor, multiple
alarms can be test.
Test mode will exit
2 minutes after last
alarm is detect.
Follow instructions
supplied with your
alarm.
Monitor detected
pattern but
notifications have
been disabled for
10 minutes.
Monitor detected
pattern but owner has
dismissed alert. Monitor
will provide alert next
time alarm is heard.
Unplug monitor and
plug back in, run test
to verify operation.