Kidde RemoteLync User Manual page 7

Operating Instructions
• Once registration is complete, test the alarm furthest from
your RemoteLync as instructed by the monitor. Please note
that when you put your alarm into test mode that it will
sound, this is normal – do not remove batteries or cover unit
during this test.
CAUTION: Due to the loudness (85 decibels)
!
of smoke and CO alarms, always stand an
arm's length away from alarms when testing.
• Monitor will announce when a smoke or carbon
monoxide alarm is detected.
• Your RemoteLync will announce "Now Monitoring" once
both smoke and carbon monoxide alarm patterns are
recognized or the setup button is pressed to skip one or the
other type.
• To add a person to notify in case of an alarm select "edit"
then "add" to view a list of all contacts available on your
device. Choose the desired contact, verify their information,
and finalize using "add".
• As desired, enable SMS or email notification from the
monitor page by pressing the icon next to each contact.
• Once all contacts are added select "done".
Congratulations, your Kidde RemoteLync is now actively
monitoring for smoke and/or carbon monoxide alarm signals,
and ready to notify you on your mobile device.
7