Kidde RemoteLync User Manual page 11

Operating Instructions
What to expect
RemoteLync App should be on your mobile device
You should connect to the Kidde... monitor through Wi-FI. The
monitor will report back what routers are with in range for you to
select and provide passcode to inorder for monitor to connect.
Once monitor is connected to your router, you will add it to your
account. Besure you are connected to the same Wi-Fi router as the
monitor for enrollment to work.
With the monitor in setup mode you will test the smoke and/or
CO alarms furthest from the monitor so it can judge the volume
it will hear alarms at. This helps reduce false detections from your
neighbours house or appartment.
App will show testing progress. It will indicate if self-test completed
successfully and whether or not it detected an alarm pattern from
your alarms if they were tested.
When an alarm pattern is detected, monitor will send out notifications
to you and your contacts you have added for this monitor.
Follow the same processes as above for connecting to wireless router,
enrolling into account and learning alarm furthest from monitor.
App will walk you through the process to re-establish detection of
your alarms.
You will go through the same process of "connecting to wireless
router" as was done at setup.
Go into monitor menu and remove monitor from account if you no
longer have the monitor.
11