Chapter 2. Hardware Installation; The Front Panel - iBall Baton iB-WRA300N3G User Manual

Chapter 2. Hardware Installation

2.1 The Front Panel

The LEDs locate on the front panel. They indicate the device's working status.
LED Explanation:
Name Status
On ( Red Colour)
PWR
On ( Red Colour)
Off
Flash
DSL On
Off
On (Red Colour)
Internet Flash (Green Colour)
Off
On
LAN
Flash
(Ethernet)
Off
On
USB
Off
WLAN On
Flash
Off
Off
Flash
WPS
On
iB-WRA300N3G 300M Wireless-N ADSL2+ 3G Router User Guide
Figure 2-1
Indication
Device Init
Device Init OK
Power is off.
ADSL negotiation is in progress.
LINE port is linked up.
LINE port is linked down.
Port Init
Data is being transferred over the Internet.
There is no data transmission over the internet
There is a successful connection on the
corresponding Ethernet port but no activity.
Data is being transferred over the Ethernet port.
There is no connection on the corresponding
Ethernet port or the connection is abnormal.
2G/3G Network is initializing
No device is connected
The wireless function is enabled but no data
is being transmitted.
There is wireless data being transmitted.
The wireless function is disabled.
There is no WPS activity
Device is ready to make WPS connection.
WPS connection established
4