Uninstalling Phoenix; Data Packages - Nokia 8310 Service Manual

Nokia Mobile Phones Customer Care E&A
Technical Services Repair Concepts

Uninstalling Phoenix

If you need to remove Phoenix Service Software from your computer:
1. Make sure that the dongle is attached (unregistration).
2. Go to the Control Panel and select Add/Remove Programs.
3. Select NHM–7 / NPE–4 RELEASE for uninstallation and click Add/Remove.
4. Click OK to remove the application
You may be required to reboot your PC after uninstallation.
Note: If you have different product packages installed, the components are uninstalled only if they are not
included in other product packages.

Data Packages

Data Packages (DP) is a name for a helpful feature in the Phoenix software. This type of feature provides a
flexible way of distributing and installing Phoenix and its data files. All product–specific data is separated
from the program code and installed separately. This means that the installation is performed in at least two
steps.
Each product will have its own Data Package (DP), which you get from the Partner Websites.
Starting a session
Concepts
In the Phoenix context, Product means the cellular phone attached to a PC. More specifically, it is a
particular type of phone.
Connection means the type of cable used to attach the phone to the port to which the other end of the
cable is attached.
Selecting a product
Many of Phoenix's features are product–specific. It is, therefore, mandatory to choose the product you will
be working on at the beginning of the session.
Select the menu item File – Choose Product. You will be presented with a list of available products.
After the product selection, you will see an additional menu item on the main menu. If you take a look at
the available menu items, you will see that their number has increased.
Selecting a connection
The connection defines the cable and the communications port that will be used when connecting to the
phone.
1. Active connections are listed in the toolbar's Connection pull–down menu. You should make sure that the
connection is correct before using the software. Change it, if necessary. In case the connection is the wrong,
you need to create a new one.
2. Select Settings from the pull–down menu .
3. Select Add in the Connection List Dialog and in fill the relevant fields in the Connection setup dialog.
Service Manual 8310 Level 2
PAGE 11 (28)
Confidential
Copyright 2001 © Nokia Mobile Phones
Approved 2.0
SQX 00288-en MWy
01.10.2001