Supported Operating Systems - Nokia 8310 Service Manual

Nokia Mobile Phones Customer Care E&A
Technical Services Repair Concepts
Phoenix
Phoenix is the next generation Service Software. It has been designed to meet the challenges in servicing
modern cellular phone technology.
The Phoenix program has been built using component architecture. This means that the actual program is
small and most of the program's functionality is divided into dynamically loaded modules (DLLs).

Supported Operating Systems

Windows 95, 98, 2000, ME and NT 4.0 (SP4).
Hardware requirements for using Phoenix
Minimum:
Processor 233 MHz, RAM memory 64 MB, Disk space 50–100 MB.
Recommended for Windows 2000:
Processor 700 MHz, RAM memory 512 MB, Disk space 50–100 MB.
Introduction
This section briefly describes how to install the Phoenix software and includes some basic information on
how to use the program. For more detailed information, please refer to Phoenix's Help –files. Each feature
in Phoenix has its own Help function, which can be activated while running the program.
Press the F1 key or the feature's Help–button to activate a Help –file.
Installing Phoenix
1. Download the latest release. Please check always the latest version, which is available on Partner
Pages/PWS. Download and read the release notes, which have useful information on the software version
you are using.
2. Download the latest data packages for the products you will be using.
3. Before you start installing the program, check that:
– the dongle is attached to parallel port. Contact your supervisor in order to obtain a suitable dongle.
– you have administrator rights (Windows 2000 or NT only).
This is required in order to be able to install Phoenix.
4. Install Phoenix by executing the Phoenix installation package and follow the instructions on the screen.
Program files are stored under " C:\Program Files\Nokia\Phoenix " (default).
5. The installation checks that the latest supported dongle driver version is installed. The dongle driver is
installed if there is no previous installation of the dongle driver or if the installed dongle driver is older than
the latest supported version.
Note: If the dongle driver is installed during installation, you need to reboot your PC and restart the
installation after reboot.
6. Reboot your PC before using Phoenix, if you are requested to do so.
Note: In some products the setup may require you to reboot the computer. In either case, the setup will
register Phoenix components. This process can take few minutes.
7. Install the data package by executing the installation package and follow the instructions on the screen.
The data packages will create product specific directories under the installation directory.
Data files are stored under " C:\Program Files\Nokia\Phoenix " (default).
Service Manual 8310 Level 2
PAGE 10 (28)
Confidential
Copyright 2001 © Nokia Mobile Phones
Approved 2.0
SQX 00288-en MWy
01.10.2001