Servicing And Repairs - Makita HG5002 Instruction Manual

ACCESSORIES
The following nozzles are recommended for the HG5002 hot air blower:
Reflector nozzle
• When changing nozzles cool down the tool or work with pliers only.
• Do not touch a hot nozzle, and to avoid fire risk put it down on a non-flammable sur-
face.
• Nozzles are fitted on the heat tube; care must be taken that no hot air can flow out to
the tool (damage the tool).
• Only MAKITA nozzles should be used.

SERVICING AND REPAIRS

• Always keep the tool and air inlets clean.
• In cases of breakdown or of damage to the tool, repair must be carried out by an aut-
horized customer service center.
Glass protection nozzle Wide slot nozzle
GB
11