Tv And Satellite Receiver; Tv, Satellite Receiver, And Vcr - Sony TRINITRON KV-27FS12 Service Manual

TV and Satellite Receiver

2
From
cable/
antenna
Satellite receiver
1
SATELLITE IN
VHF/UHF
AUDIO R AUDIO L VIDEO
Satellite
antenna LINE OUT
cable
3
1
Connect the cable from your satellite antenna to SATELLITE IN on
your satellite receiver.
2
Connect the coaxial cable from your cable or antenna to the
VHF/UHF jack on your TV.
3
Using A/V cables, connect AUDIO and VIDEO OUT on your
satellite receiver to AUDIO and VIDEO IN on your TV.


For optimum picture quality, use S VIDEO instead of the yellow A/V cable.
S VIDEO does not provide sound, the audio cables must still be connected.


You can use the button to switch between the VHF/UHF and satellite
receiver inputs.
Connecting Your TV
Rear of TV
IN
OUT
9
Operating Instructions

TV, Satellite Receiver, and VCR

Satellite
antenna
cable
1
4
VCR
SATELLITE IN
VHF/UHF
AUDIO R AUDIO L VIDEO
AUDIO R AUDIO L VIDEO
IN
LINE IN
LINE OUT OUT
Satellite receiver
LINE OUT
5
1
Connect the cable from your satellite antenna to SATELLITE IN on
your satellite receiver.
2
Connect the coaxial cable from your cable or antenna to the
IN jack on your VCR.
3
Using a coaxial cable, connect the OUT jack on your VCR to the
VHF/UHF jack on your TV.
4
Using A/V cables, connect AUDIO and VIDEO OUT on your
satellite receiver to AUDIO and VIDEO IN on your VCR.
5
Using A/V cables, connect AUDIO and VIDEO OUT on your VCR to
AUDIO and VIDEO IN on your TV.


To view from the satellite receiver or VCR, select the video input to which
your satellite receiver or VCR is connected by pressing
control.
10
Rear of TV
From
cable/
antenna
2
VHF/UHF
IN
OUT
3
on the remote