Sony CDP-CX260 Service Manual page 17

HOLDER (DISC A) ALIGNMENT
Cam
(1) Rotate the cam and adjust to the
position shown in the figure.
(2) Check that the state is as shown in
the figure.
Thrust screw
(3) After applying suitable locking compound to the
Thrust
screw
0 - 1mm
Holder (disc A)
part, rotate the thrust screw until the holder (Disc A) comes to the center of the disc.
– 17 –
Cam Holder (disc A)
Disc
Disc
Holder (disc A)