Playback; Vaflableplayback Modes; Playback Ofa Ntsctape - Sanyo VHR-VX400 Instruction Manual

Hide thumbs Also See for VHR-VX400:
Table of Contents

Advertisement

I
3
BASICOPERATION
PLAY
REW
#
FF
STOP
PMBE{
EJECT
Auto power on
The power is automatically
switched on as a cassette is
inserted while the VCR is in the
standby mode.
Auto play
The VCRwill play back a tape
automatically when a video
cassette is inserted whose
erasure-prevention tab has been
removed.
Auto eject
When a video cassette without an
erasure-prevention
tab is played
to the end of the tape, the tape
will be automatically
rewound
and then the cassette will be
ejected.
Power olf eject
The video cassette will be ejected
when the EJECTbutton is
pressed, even when the VCR is in
standby mode.
11
PLAYBACK
Turn on the
TV.
Set the TV to the video channel. If using
an AV-cable, set it to AV mode.
1
lnserta
recorded videocassette.
-
Cassette loading
Gently push the centre of the cassette
until it is loaded automatically.
Erasure-prevention
tab
Z
Pres.s the P1.AY button.
stop
Press the
STOP button.
Eject the cassette
Press the EJECT button on the VCR.
Rewind
Press the REW button during stop or play for
reverse search operation.
Fast-forward
Press the FF button during stop or play for
forward search operation.
Variable playback modes
Forward search
Press the FF button during playback or
fast-forward operation.
Reverse search
Press the REW button during playback
or
rewind operation,
Still picture
Press the PAUSE/STILL
button during normal
playback.
Frame advance
Press the PAUSE/STILL
button during still
picture.
A
During variable playback modes the picture
may contain some noise or vibration that
cannot be corrected. This is not a
malfunction.
If still picture playback is continued for
about five minutes, the VCR will
automatically
change to stop mode in order
to prevent the tape from being damaged.
This VCR will not guarantee the variable
playback modes picture quality of tapes.
Playback of a NTSC tape
This VCR can playback a NTSC tape on a
PAL (B/G) or NTSC 4.43 system TV.
For NTSC playback system setting, refer to
"Selecting
the function"
on page 10.
NTSC
I ,%74,
II PAL,,I
or~q
When you playback a NTSC tape on a PAL
TV,
If the
image is unstable,
rolling vertically,
use the
TV vertical hold button to stabilize
the image.
The image may shrink vertically and a
black band may appear at the top and
bottom of the screen.
A
A NTSC
tape cannot be copied normally.
Picture quality of
NTSC tapes cannot be
guaranteed
with this VCR.

Advertisement

Table of Contents
loading

Table of Contents