Table of Contents
Advertisement
@ VCR
TUNING
1
~
Turn on your TV. Set the TV to the video channel. If using
an AV-cable, set it to AV mode.
2
T
c+
Turn off the VCR using the
(!)/1
button.
3
T
Confirm the preset programme position
using
.
the CH (+ or -) button.
The TV stations are already preset as in the right table.
When this is ok for you, go to ~
CLOCK SEITING. If retuning this VCR,
continue with step4.
When retuning this VCR, press both the
CHANNEL (+ and -) buttons on the VCR
'=
F,
simultaneously for at least 3 seconds.
Auto tuning will start. It will take a few minutes, please be patient.
When finished, the TV station preset to the lowest programme position number will be
tuned on your TV screen.
@,
CLOCK
SETTING
Call up the "CLOCK SET" screen using the
'@
E"
I
Set the now setting (day, month, year and
time) using the numeric (O -9) buttons.
CLOCK SET
01.12.1999
15:00
I
[CH-/+l+TIME
SHIFT
[
CLEAR 1 TOCORRECT
[OK I* ENTER
3
To store the setting, press the OK button.
Programme
position
2
7
9
10
28
TV station
AS CH2
AS CH7
AS CH9
AS CH1O
AS CH28
A
Auto tuning
During the auto tuning
operations,pleasedo not
pressany of the buttons or
controls on the VCRor remote
control.
Auto tuning is not possible if
the VCRis set to external
input mode.
The skip function will be
automaticallyset for all
position numberswhere no
TV station has been preset,
A year display
Theyear 2000, is set by
entering 00,
Theyearwill be displayedin
full, on screen,however,to
set the year you only needto
enter the last two digits.
Advertisement
Table of Contents
