Front Seats - Jeep 2014 Cherokee User Manual

FRONT SEATS

Power Seats
The power seat switches are located on the
outboard side of the front seat cushions.
The power seat switch controls forward,
rearward, up and down adjustments.
The recline switch controls the angle of
the seatback.
• Press the switch forward or rearward
and the seatback will move in either
direction.
The power lumbar switch controls the
amount of lumbar support needed.
• Push the switch forward to increase
the lumbar support.
• Push the switch rearward to decrease
the lumbar support.
• Pushing upward or downward on the switch will raise and lower the position of the
support.
Memory Seat
• The memory seat feature allows you to
save two different driver seating posi-
tions, driver's outside mirror, and radio
station preset settings. The memory
seat buttons are located on the driver's
door panel.
• Turn the ignition ON. Adjust all
memory profile settings, press the S
(SET) button then press 1 or 2 within
five seconds. The Electronic Vehicle
Information Center (EVIC), will display
which memory position is being set.
• To program a Key Fob to the memory
position, place the ignition switch in the LOCK/OFF position and remove the Key
Fob, press and release the LOCK button on the Key Fob to be programmed within
five seconds of pressing button 1 or 2.
• Press 1 or 2 to recall the saved positions, or press UNLOCK on the programmed
Key Fob.
• Refer to the Owner's Manual on the DVD for further details.
GETTING STARTED
1 — Power Seat Switch
2 — Recline Switch
3 — Power Lumbar Switch
Power Seat Switches
Memory Seat Buttons
23