Verizon Razzle User Manual page 61

The default lock code is the last 4 digits of your mobile number.
EDIT CODES
To set a new lock code:
1. From idle mode, press the OK Key to unlock the keypad, press the
OK Key [MENU], swivel to the QWERTY keypad and press
& Tools, 6. Phone Settings, 7.
2. Enter the four-digit lock code, then press the OK Key.
3. Press
1. Edit Codes.
4. Select one of the following settings, then press the OK Key.
Phone Only: Allows you to edit the lock code for Security. (The default lock code is
the last 4 digits of your mobile number.)
Calls & Services: Allows you to edit the lock code for Restrictions. (The default lock
code is the last 4 digits of your mobile number.)
5. If
Phone Only is selected, enter the new four-digit code in the
New Code field. Enter the new four-digit code again in the
New Code field to confirm your input.
6. If
Calls & Services is selected, enter the current lock code in the
Enter Current Code field. Enter the new four-digit code in the
New Code field. Enter the new four-digit code again in the
Chapter 4 − Menu Function
60
9. Settings
Security.
Enter
Re-enter
Enter
Re-enter
New Code field.
7. Press the OK Key [SET].
RESTRICTIONS
Use the following procedure to configure Location Setting, Calls and Messages
restrictions.
1. From idle mode, press the OK Key to unlock the keypad, press the
OK Key [MENU], swivel to the QWERTY keypad and press
& Tools, 6. Phone Settings, 7. Security.
2. Enter the four-digit lock code, then press the OK Key. The default
lock code is the last 4 digits of your mobile number.
3. Press
2. Restrictions.
4. Enter the four-digit lock code again, then press the OK Key.
5. Select one of the following settings:
Location Setting: Unlock Setting/Lock Setting.
Calls: Incoming Calls/Outgoing Calls.
For Incoming Calls, set Allow All,
For Outgoing Calls, set Allow All,
Messages: Incoming Messages/Outgoing Messages.
For Incoming Messages, set
For Outgoing Messages, set
9. Settings
Contacts Only or Block All.
Contacts Only or Block All.
Allow All or Block All.
Allow All or Block All.