Remove Battery; Charging Your Battery - Verizon Razzle User Manual

2. Slide (1) the battery into the slot by
aligning the contacts and press (2)
until you hear the "click".
3. Align the cover tabs with the slots on
the back of the device and press the
battery cover onto the unit until it
snaps into place.
If the battery is not correctly placed in the
compartment, the handset will not turn on and/or the battery may detach during use.

REMOVE BATTERY

1. To remove the battery cover, push down
(1) battery door release latch with your
finger tip and pull off (2) the battery
cover.
2. Push the bottom of the battery upwards
while inserting your finger into the slot
(1) and remove (2) the battery.
Chapter 1 − Before Using
12
3. Align the cover tabs with the slots on the
back of the device and press the battery cover
onto the unit until it snaps into place.

CHARGING YOUR BATTERY

1. To charge, open the Charging/Data Jack cover
and connect the Wall Charger. Make sure you
align the connector as it appears in the image.
If the battery connector is not properly aligned, damage
could occur to the charging connector and the phone
may not charge.
CORRECT
CORRECT
INCORRECT
INCORRECT