Battery Handling Information - Verizon Razzle User Manual

2. Plug the other end into a standard outlet.
3. To remove the Wall Charger, squeeze the
adapter' s side buttons (1) and pull the
charger from the device (2).
When you charge the battery with the handset
powered off you will see a charging status screen.
After the charging has completed, the Charge
Complete message appears. You cannot operate the phone until it is powered on.
The battery is not fully charged at the time of purchase. Fully charge the battery
before use.
It is more efficient to charge the battery with the handset powered off.
Battery operating time gradually decreases over time.
If the battery fails to perform normally, you may need to replace the battery.

BATTERY HANDLING INFORMATION

DO'S
Only use the battery and charger approved for use with the Razzle
Only use the battery for its original purpose.
Try to keep batteries in a temperature between 41°F (5°C) and 95°F (35°C). If the
battery is stored in temperatures above or below the recommended range, give it
time to warm up or cool down before using.
Store the discharged battery in a cool, dark, and dry place.
Purchase a new battery when its operating time gradually decreases after fully
charging.
Properly dispose of the battery according to local laws.
DON'TS
Don't attempt to disassemble the battery – it is a sealed unit with no service-
able parts.
Don't accidentally short circuit the battery by carrying it in your pocket or purse
with other metallic objects such as coins, clips and pens. This may critically dam-
age the battery.
Don't leave the battery in extremely hot or cold temperatures. Otherwise, it could
significantly reduce the capacity and lifetime of the battery.
Don't dispose of the battery by placing into a fire.
TM .
Before Using − Chapter 1
13