Table of Contents
Advertisement
Installing the dryer.
Reversing the Dryer Door Swing
Open the dryer door. Remove the 4 hinge
1
hole plugs or screws from the left side of door
opening. Place nearby for future installation.
NOTE: You may need a plastic knife to help pull
out the plugs. Be careful not to scratch the paint.
Remove the four screws that secure the door
2
hinges to the dryer front panel. NOTE: Remove
1 screw from each of the 2 hinges first. Hold the
door firmly before removing the last 2 screws.
Rotate the door 180° and reinstall the door
3
hinges to the dryer front panel with the
4 screws.
Install the 4 hinge hole plugs or screws that
4
were removed in step 1 into the open screw
holes on the right side of the door opening.
16
Remove 4 screws—one from each hinge first
Advertisement
Table of Contents
