Specifications, Unpacking & Set-Up - Formax FD 1502 autoseal Operator's Manual

SPECIFICATIONS
Paper side guides
In-feed table
Control Panel
Lower Fold Plate
FUNCTION:
The 1502 Pressure Sealer folds and seals many different configurations including C, V, Z and custom
folds. It may also use several different sizes of forms. For configuration and/or paper sizes, see listing
below.
Paper size:
Fold styles:
Fixed speed:
Hopper capacity:
Weight:
Dimensions:
Power supply:
Certifications:
UNPACKING & SET-UP
1. Check package for shipping damage. If there is shipping damage, do not discard the box.
2. CAUTION: Two people are required to lift the machine out of the box.
3. Remove the paper tray and insert into rails on bottom pan.
5. Install upper fold plate (refer to page 3 part 4 for proper installation).
4. Plug cord into machine and into wall outlet.
5. Place the jam clearing handle into the the holder
which is mounted to the machine. This is the jam
clearing handle's proper location (see picture, right).
8.5" W x 14" L
C, Z, V and custom folds
Up to 100 sheets per minute, based on 11" Z fold
Up to 200 sheets 20#
82 lbs.
24" L x 17" W x 13" H
120V, 50/60 Hz
UL, CE and CUL Approved
Top Cover
1
Upper Fold Plate
Catch Tray
Jam clearing tool