Installer Setting - Fan Operation In The Cooling Mode And Thermal Off Conditions - LG PREMTB10U Installation & Operation Manual

INSTALLATION INSTRUCTIONS
88
Installer setting – Fan operation in the cooling mode and thermal off conditions
It is a function that sets the indoor unit fan movement, in cooling mode, when thermal is off.
1 If pressing button long for 3
seconds, it enters into
Cooling thermal off Fan operation
installer setup mode.
- If pressing once shortly, it enters into
user setup mode. Please press more
than 3 seconds for sure.
If moving to room temperature perception
2
sensor selection menu by pressing
button, it indicates as picture below.
Set Thermistor value by pressing
3
button.
Function Code Setting value
value Guard time
00 Fan speed Low
01 Fan off
02 Fan speed
Setting value
Press button to save.
4
Pressing button will exit settings mode.
5
❈ After setup, it automatically gets out of
setup mode if there is no button input for
25 seconds.
❈ When exiting without pressing set button,
the manipulated value is not reflected.