Maintenance - Swann SH3020 User Instructions

MAINTENANCE

Note: To avoid electric shocks, turn the unit off and unplug from the mains
socket before any maintenance is started.
1. If the dehumidifier is not being used for a long time, remove the plug
from the mains socket.
2. For best dehumidifying performance, do not block the air inlet and outlet
vents. There should be no obstruction around the unit.
Cleaning
To clean the surface of the appliance simply use a damp cloth. Do not use
detergents or an abrasive sponge, doing so may damage the plastic
surface.
Don't spray water on to the appliance.
Protection:
1.The compressor is fitted with an over-temperature protector unit. When
the compressor temperature is too high, it will automatically cut the power to
the compressor.
2. The electronic panel will automatically control and protect the
dehumidifier. When the ambient temperature is higher than 35 ºC or lower
than 5 ºC , the electronic panel will power off automatically to prevent
damage.
Precautions:
1. The dehumidifier will not operate if the humidity setting is higher than the
ambient humidity.
2. When stopping the dehumidifier, you should wait at least 3 minutes
before restarting. This will protect the compressor from damage through
overheating.
3. To ensure the dehumidifier functions correctly, a minimum 1 meter clear air
space is required around the front and back panels.
16