Related Manuals for Swann SH5010N
Summary of Contents for Swann SH5010N
- Page 1 Dehumidifier Model: SH5010N Helpline 01703 404703 v1.0 SH5010N_front_n_back_IM.indd 1 24/06/2015 09:18...
- Page 2 IMPORTANT INFORMATION – RETAIN FOR FUTURE USE When using any electrical appliance, basic safety precautions should always be followed including the following: • Always ensure that the voltage on the rating label corresponds to the mains voltage in your home. •...
-
Page 3: Safety Precautions
SAFETY PRECAUTIONS To prevent injury to the user or other people and property damage, the following instructions must be followed. Incorrect operation due to ignoring of instructions may cause harm or damage. The seriousness is classified by the following indications. WARNING This symbol indicates the possibility of death or serious injury. -
Page 4: Electrical Information
Electrical Information • The manufactures nameplate is located on the rear panel of the unit and contains electrical and other technical data specific to this unit. • Be sure the unit is properly grounded. To minimize shock and fire hazards, proper grounding is important. -
Page 5: Control Panel
CONTROL PANEL The control panel of the dehumidifier you purchased may look like one of the following: Indicator lights Error Codes: Power on indicator light (green) AS- Humidity module sensor Low fan speed indicator light (green) error--Unplug the unit and plug it Bucket full indicator light (red) back in. - Page 6 Protection Code: 12. POWER Pad Press to turn the dehumidifier on and off. P2- Bucket is full or bucket is not in removed or not replaced in the proper the right position-- Empty the bucket position. and replace in the right position. 5.
-
Page 7: Operating The Unit
OPERATING THE UNIT Positioning the unit A dehumidifier operating in a basement will have little or no effect in drying an adjacent enclosed storage area, such as a closet, unless there is adequate circulation of air in and out of 40cm or more the area. -
Page 8: Removing The Collected Water
Removing the collected water There are two ways to remove collected water. 1. Use the bucket • When the bucket is full, the unit will automatically stop running, and the Full indicator light will flash. • Slowly pull out the bucket. Grip the left and right handles securely and carefully pull out straight so water does not spill. -
Page 9: Care And Maintenance
CARE AND MAINTENANCE There are two ways to remove collected water. Care and cleaning of the dehumidifierTurn off the dehumidifier and remove the plug from the wall outlet before cleaning. 1. Clean the Grille and Case - Use water and a mild detergent. - Do not use bleach or abrasives. -
Page 10: Troubleshooting Tips
TROUBLESHOOTING TIPS Before calling for service, review the chart below first yourself. -
Page 11: Warranty
DOCUMENTATION We Swan Products Ltd declare that this product conforms to the following product legislation in accordance with the following directive(s): 2014/30/EU. The EMC Directive (the Electromagnetic Compatibility Directive) 2014/35/EU. The LVD Directive (Low Voltage Directive) 2011/65/EU. The RoHS directive (Restriction of Hazardous Substances Directive) WARRANTY This product is guaranteed for 2 years from the date of original purchase. -
Page 12: Disposal Of Unit
DISPOSAL OF UNIT Appliances bearing the symbol shown here may not be disposed of in domestic rubbish. You are required to dispose of old electrical and electronic appliances like this separately. Please visit www.recycle-more.co.uk www.recyclenow.co.uk for access to information about the recycling of electrical items. Please visit www.weeeirland.ie for access to information about the recycling of electrical items purchased in Ireland. - Page 13 www.swan-brand.co.uk 2 year Est. 1 931 GUARANTEE Scan this QR code We love we’re proud Find us on Facebook to hear about what we do of our quality our story * on selected products Copyright © Swan Products Ltd. PO Box 3117, Stoke-on-Trent ST4 9GD SH5010N_front_n_back_IM.indd 2 24/06/2015 09:18...