Troubleshooting - Swann SH3020 User Instructions

TROUBLE SHOOTING
Should your dehumidifier fail to function, please check the problems and
possible causes in the tabIe below before calling customer services.
Problem
The unit doesn't
operate.
The dehumidifying
function doesn't
work
No air is discharged
Operation is noisy
Possible Cause
Has the power cord
been disconnected?
Is the socket faulty?
Has the fuse in the plug
blown?
Is the tank full indicator
blinking? (The tank is
full or incorrectly
positioned)
Is the temperature of
the room above 35 º C or
below 5 º C?
Is the air filter clogged?
Is the intake duct or
discharge duct
obstructed?
Is the air filter clogged?
Is the unit tilted or
unsteady?
Is the air filter clogged?
15
Solution
Check the plug is
connected the outlet
socket properly.
Try another socket
Check the fuse in the
plug.
Empty the water in the
drainage tank and then
reposition the tank.
The protection device is
activated and the unit
cannot be started.
Clean the air filter.
Remove the obstruction
from the discharge duct
or intake duct.
Clean the air filter.
Move the unit to a
stable, sturdy location.
Clean the air filter.