Operating Your Dehumidifier; Keys And Display Light Functions - Swann SH3020 User Instructions

OPERATIONS

KEYS and DISPLAY LIGHT FUNCTIONS

1. Plug in the unit, it will start with a beep and the power light (1)
on. Press the POWER key to start the dehumidifier, the lights within the
water tank illuminate and the LED display will show the room humidity. If
the set humidity is lower than the room humidity, the unit will run in
dehumidifying mode at high fan speed (default). The dehumidifying
indicator light (5)
2. Press the MODE key to select the function of dehumidify or fan. The fan
indicator light (4)
dehumidifying indicator light (5)
dehumidifying mode.
3. Once the unit is operating, press the DOWN key to set the desired
humidity level. (Default humidity is RH70%.) By continually pressing the
DOWN button you will scroll through the following humidity settings:
RH80%→RH75%→RH70%―――RH45%→RH40%→(― ― Override)
(Override dehumidifying means: The unit will dehumidify by constantly
Running at RH80% without detecting the room humidity).
When the environment humidity is higher than the setting humidity, the
unit will automatically start.
When the environment humidity is lower than the setting humidity, the
unit will automatically stop and the humidity value will flash.
and the fan speed indicator lights will also be on
will light if you choose fan mode, the
9
will light if you choose
will be