Installing The Cpu And Cpu Cooler - Gigabyte GA-B150M-D2V DDR3 User Manual

Operating
Š
System
Form Factor
Š
* G IGABYTE reserves the right to make any changes to the product specifications and product-related information without
prior notice.
Please visit GIGABYTE's website
for support lists of CPU, memory
modules, and SSDs.
1-3

Installing the CPU and CPU Cooler

Read the following guidelines before you begin to install the CPU:
• Make sure that the motherboard supports the CPU.
(Go to GIGABYTE's website for the latest CPU support list.)
• Always turn off the computer and unplug the power cord from the power outlet before installing the
CPU to prevent hardware damage.
• Locate the pin one of the CPU. The CPU cannot be inserted if oriented incorrectly. (Or you may
locate the notches on both sides of the CPU and alignment keys on the CPU socket.)
• Apply an even and thin layer of thermal grease on the surface of the CPU.
• Do not turn on the computer if the CPU cooler is not installed, otherwise overheating and damage
of the CPU may occur.
• Set the CPU host frequency in accordance with the CPU specifications. It is not recommended
that the system bus frequency be set beyond hardware specifications since it does not meet the
standard requirements for the peripherals. If you wish to set the frequency beyond the standard
specifications, please do so according to your hardware specifications including the CPU, graphics
card, memory, hard drive, etc.
Installing the CPU
Locate the alignment keys on the motherboard CPU socket and the notches on the CPU.
LGA1151 CPU Socket
Alignment
Key
Pin One Corner of the CPU Socket
Do not remove the CPU socket cover before inserting the CPU. It may pop off from the load
plate automatically during the process of re-engaging the lever after you insert the CPU.
Please visit GIGABYTE's website for details on hardware installation.
Support for Windows 10/8.1/7
* Please download the "Windows USB Installation Tool" from GIGABYTE's website
and install it before installing Windows 7.
Micro ATX Form Factor; 22.6cm x 17.4cm
Notch
Alignment
Key
Triangle Pin One Marking on the CPU
- 8 -
Please visit the Support\Utility List
page on GIGABYTE's website to
download the latest version of apps.
LGA1151 CPU
Notch