Table of Contents
Advertisement
Secure Dishwasher in Opening
The dishwasher must be secured to keep it from tilting when the door is opened. Choose one of the two
methods described below for securing the dishwasher.
Countertop Anchoring:
1. If necessary, adjust leveling screws so mounting brackets touch the underside of the countertop (see
Figure 14).
2. Screw the mounting brackets firmly to the countertop using #8 x
Note: Check levelers to make sure weight of dishwasher rests on floor.
3. Open and close the dishwasher door slowly. If the door hits the mounting bracket screw heads, adjust
front leveling legs.
Floor Anchoring :
This is a difficult procedure. Use only where the countertop mounting brackets cannot be used.
1
1. Screw
/
" lag screws (not included) through the holes provided in the frame rail (see Figure 14).
4
2. Use expansion fasteners if the floor is concrete.
Figure 14
To Install Custom Wood Panels
The dishwasher door and access panel can be customized to match wood cabinets. This will require a wood
panel trim kit.
Kit is available from your dealer or parts supplier—kit number GPF18.
Countertop Anchoring
Mounting Brackets
5
Use #8 X
/
" Phillips
8
head screws (supplied).
Hex End
3
Wrench or
/
16
Socket
"
12
5
/
" Phillips head screws (supplied).
8
Floor Anchoring with
1
/
" Lag Screws
4
Advertisement
Table of Contents
