Set Up Your Surface Pro; Plug In And Turn On - Microsoft Surface Pro User Manual

Set up your Surface Pro

Grab your Surface and let's go!
Before you start... Make sure a wireless network is available and you have the network password (if the network
is secured).

Plug in and turn on

1. If you have a Typing Cover, bring it close to your Surface, so that it clicks into place (see picture).
2. Flip out the built-in kickstand on the back of Surface (either position).
3. Connect the plug to the power supply, and plug the power cord into a wall outlet or power strip.
4. Connect the power connector to the charging port on Surface (either direction works).
A light appears at the end of the connector when Surface is getting power:
5. Press and release the Power button (on the top right edge).
Surface turns on and setup begins.
© 2014 Microsoft Page 5