Daewoo KOR-1P5C7S Service Manual page 9

2. KOR-1P557S
1. Connect the main lead to an electrical outlet.
2. After placing the food in a suitable container, open the oven
door and put it on the plate tray.
3. Close the door securely.
4. Choose cooking power level by setting V.P.C knob to the
desired position. Refer to cookbook for recommended
power levels.
5. Determine cooking time. Consult cookbook for recipe timing.
Oven light turns on and cooling fan starts to operate.
Microwave cooking starts.
6. You may open the door while the oven is operating. As
soon as the door is opened, the safety mechanisms stop
the generation of microwave power and the operation of
cooking timer.
If you wish to change the time during cooking, simply adjust
the timer to the desired time.
7. When the timer reaches zero, a bell will ring and the unit will
turn off. Oven light turns off. If additional cooking time is
needed and the door is closed, the oven will automatically start when the timer is reset.
Make sure the oven is properly installed and plugged into the electrical outlet.
Variable power cooking
ON and OFF cycle time of mechanical V.P.C switch is 30 seconds.
When the V.P.C knob is set to the desired position and timer knob to the desired position, the V.P.C switch has a cycle
(ON/OFF time(sec.)) listed below.
Variable power setting
Power level
MED HIGH
LOW STAGE
DEFROST
HIGH
MEDIUM
• Various clicking noises may be heard
when turning V.P.C knob. This is normal
and does not affect the operation of your
microwave oven.
Approximate Percentage
8
of Power
100%
77%
55%
33%
17%