To Install The Adapter Cable And Connect The Navigation Radio - BMW Traffic Pro Installation Instructions Manual

7 .

To install the adapter cable and connect the navigation radio

A3
1
31
30
1
Retrofit/Installation kit No: 65 90 0 027 973
Installation instructions No.: 01 29 0 028 261
X18126
A1 7
F 36 0176 B
A1+X18126
F 36 0177 B
11
2
F 36 0178 B
A2
F 36 0179 B
Issue date: 05.2001
Connect branch A1, black 17-pin plug casing on
the adapter cable A to the black 17-pin socket
casing X18126 on the audio wiring harness.
Affix a rattle guard (7) to the second rattle guard
(7) and then affix them over the plug connection
A1+X18126. Lay branch A3, exposed cable end,
blue/yellow cable on the adapter cable A, along
the standard wiring harness to the A pillar on the
left-hand side and secure it with cable ties.
Place the wrapped plug connection
A1+X18126 behind the heating control so that
the wrapped plug connection A1+X18126 cannot
rattle.
Screw the stud bolt (11) into the navigation radio
(1).
Screw the radio retaining pin (2) on to the stud
bolt (11).
Connect the existing aerial cable (30) for the
radio aerial to the navigation radio (1).
The coaxial aerial plug (31) must be
connected on cars with aerial diversity.
Connect branch A2, black 16-pin socket casing
on the adapter cable A, to the navigation radio
(1).
EN/8