Connection To An Audio System - Sanyo FWDP105F Owner's Manual

Connection to an Audio System

Analog Audio Connection
Stereo system with Analog Audio Input
jacks
Audio
Audio cable (supplied)
This unit
Supplied cables used in this connection are as follows:
• Audio cable (L/R) × 1
Please purchase the rest of the necessary cables
at your local store.
EN
Analog Audio
Input jacks
AUDIO OUT
Digital Audio Connection
AV Receiver / Amplifier with a Coaxial Digital In Audio
jack
COAXIAL DIGITAL OUT
Connection
Connecting to a Dolby Digital decoder
for Dolby Digital audio output.
Connecting to the other device
(an MD deck etc.)
without Dolby Digital decoder.
* To complete these settings, refer to pages 15-18.
Note(s):
• T he audio source on a disc in a Dolby Digital multi-chan-
nel surround format cannot be recorded as digital sound
by an MD deck.
• B y hooking this unit up to a Dolby Digital decoder, you
can enjoy high-quality Dolby Digital multi-channel sur-
round sound as heard in the movie theaters.
• P laying back a DVD using incorrect settings may gener-
ate noise distortion and may also damage the speakers.
– 8 –
Coaxial Digital In Audio
jack
Coaxial cable (not supplied)
SETUP > AUDIO >
Setting
Audio out
BITSTREAM
PCM