Additional Connection Examples; Connecting To An Audio System And Tv (Example 3) - Sanyo DVD-SL25 Instruction Manual

ADDITIONAL CONNECTION EXAMPLES

Connecting to an Audio System and TV (Example 3)

Connect the DVD video player to an Audio System and a TV.
To AC 120V, 60Hz
To AUDIO OUT jacks
Notes:
• Please refer to the instruction manual of
your Audio System and TV.
• When you connect the DVD video player
to other equipment, be sure to turn off the
power and disconnect all of the equipment
from the wall outlet until all the
connections have been made.
• Do not connect the DVD video player to a
VCR directly. The playback picture will
be distorted because DVD video discs
are copy protected.
Using the S-VIDEO jack
Note:
Please follow the steps before turn on the power.
1. If your TV has the S-video input jack, connect the DVD video
player with the S-video cable (not supplied). (The VIDEO
OUT jack connection is not necessary.)
You can enjoy clearer picture playback.
2. Set the VIDEO OUT SELECT switch to the S position.
3. You also need to connect the left and right audio cables (not
supplied) to the AUDIO OUT jacks of DVD video player and
the Audio input jacks of the Audio System.
DVD video player
Y
VIDEO OUT
SELECT
S
R
S-VIDEO OUT
COMPONENT
To S-VIDEO
OUT jack
*Please consult your local audio/video dealer.
COMPONENT VIDEO OUT
Y P P
B R
VIDEO OUT
SELECT
S
R L
S-VIDEO OUT
COMPONENT
AUDIO OUT VIDEO OUT
*Audio cable
(not supplied)
TV
S-VIDEO IN 1
To S-video input jack
*S-video cable
(not supplied)
DVD video player
OPT.
DIGITAL
OUT
To VIDEO OUT jack
(Yellow)
To video input (Yellow)
*Video cable
AUDIO
R-AUDIO-L
(not supplied)
VIDEO
INPUT
1
To audio input jacks
(White) L
L
R
(Red) R
*Please consult your local audio/video dealer.
Using the COMPONENT VIDEO OUT jacks
Note:
Please follow the steps before turn on the power.
1. If your TV has the component video input jacks, connect the
DVD video player to these jacks. (The VIDEO OUT or S-
VIDEO OUT jack connection is not necessary.)
You can enjoy high quality picture playback.
2. Set the VIDEO OUT SELECT switch to the COMPONENT
position.
3. You also need to connect the left and right audio cables (not
supplied) to the AUDIO OUT jacks of DVD video player and
the Audio input jacks of the Audio System.
4. Set the DVD video player to
the INTERLACE position.
See page E13.
COMPONENT VIDEO OUT
Y P
B
VIDEO OUT
SELECT
S
R L
S-VIDEO OUT
COMPONENT
AUDIO OUT
*Component video cable (not supplied)
-E9-
TV with Audio/Video input jacks
VIDEO
Audio System
AUDIO
INPUT
TV
P
R
COMPONENT VIDEO INPUT
VIDEO OUT
Y P
B
P
R