Others Setting - Sanyo FWDP175F Owner's Manual

E

Others Setting

You can change the Display functions. Follow steps 1 and 2 on page 16.
3
Select the desired item.
<SYSTEM menu>
Movie Rating 1[ALL]
SYSTEM
Password 2[NR]
LANGUAGE Default 3[G]
4[PG]
AUDIO
5[PG-13]
6[R]
VIDEO
7[NC-17]
8[X-Adult]
OTHER
ENTER
EN
4
Movie Rating: (Default: 8[X-Adult])
Sets the rating level for the disc playback.
Rating settings allows you to set the rating levels of
your DVD. Playback will stop if the ratings exceed the
levels you set.
• The rating level can be changed when a password has
not been set yet for the first time use.
• If you have set a password already, "Movie Rating"
cannot be selected.
Movie Rating 1[ALL]
Password 2[NR]
Default 3[G]
4[PG]
5[PG-13]
6[R]
7[NC-17]
8[X-Adult]
Password:
Sets the password for "Movie Rating" and "Default"
settings.
– For the first time use�
• This number will be used as the password.
Record in case you forget it.
Movie Rating
Password
Default
Enter any 4-digit number(except for 4737).
• Press cursor [o] or [p] to change the number, then
press cursor [1].
• Press cursor [0] to erase if you input the incorrect number.
• When 4-digit numbers are entered, press [ENTER].
– A password has been set already� (
Movie Rating
Password
Default
Enter your 4-digit password.
• Press cursor [o] or [p] to change the number, then
press cursor [1].
• When 4-digit numbers are entered, press [ENTER].
Default:
Reset to default setting.
• "Default" is not selected if you have set a password already.
Movie Rating Restore
Password
Default
– 21 –
Select the desired
rating.
is displayed.)
5
To Exit the Menu
Note(s):
Password:
• If you forget the
password, enter "4737"
at step 4, then enter your
new password.
• Playback will stop if the
ratings exceed the levels
you set, it will require
you to enter a password
before the disc will play
back.
• This function is available
only when is displayed.
Default:
• When you do not wish to
initialize, press [SETUP]
to exit the menu at step 4.