Network Settings; Wi-Fi Internet Connection - NETGEAR NeoTV Prime GTV100 User Manual

Network Settings

When you install the NeoTV Prime, the onscreen setup prompts you to specify your network
settings. You can use the Network screen to view these settings and to change them.
The following settings are available on the Network menu:
Ethernet. Shows if the NeoTV Prime is connected to a network with an Ethernet cable.
Wi-Fi. Shows if the NeoTV Prime has joined a network with a Wi-Fi connection.
Bluetooth settings. Customize the Bluetooth settings. See
Status. Displays the following:
• IP address
• Ethernet MAC address
• Wi-Fi MAC address
• Local network
• Internet

Wi-Fi Internet Connection

You can connect the NeoTV Prime to your Wi-Fi home network to access the Internet.
To set up a Wi-Fi network connection.

1 On the Settings menu, select Network > Wi-Fi.
2 Select Turn on Wi-Fi.
The check box is now selected to show that Wi-Fi is turned on, and the Wi-Fi networks in
your area are displayed.
3 If you do not see your Wi-Fi network, select Add Wi-Fi network, and type in the network
name.
4 Select your Wi-Fi network and type the password.
The IP setting is displayed. By default, the NeoTV Prime is set to get IP settings
dynamically, which works for most networks.
5 If you want to use a static IP address (this is an advanced feature), select Static IP address
and type the IP address.
NeoTV Prime with Google TV GTV100
Settings
27
Bluetooth Settings on page 28.