Sony C6502 User Manual page 47

Using Custom Locations
You can add any location as a trusted, custom place where your device can remain
unlocked.
To Add a Custom Place
1 Make sure location mode is turned on and you are using either the High
accuracy or Battery saving setting.
2
From your Homescreen, tap
3 Find and tap Settings > Security > Smart Lock > Trusted places.
4 Tap Add trusted place.
5 To use your current location as a trusted, custom place, tap Select this
location.
6
Alternately, to enter another location, tap the magnification glass icon and type
the address. Your device searches for the entered location. To use the
suggested address, tap the address.
7
To fine-tune the location, tap the back arrow next to the address, then drag the
location pin to the desired location and tap Select this location.
To Edit a Custom Place
1 Make sure location mode is turned on and you are using either the High
accuracy or Battery saving setting.
2
From your Homescreen, tap
3 Find and tap Settings > Security > Smart Lock > Trusted places.
4
Select the place you want to edit.
5 Tap Edit address.
6
To enter another location, tap the magnification glass icon and type the
address. Your device searches for the entered location. To use the suggested
address, tap the address.
7
To fine-tune the location, tap the back arrow next to the address, then drag the
location pin to the desired location and tap Select this location.
To Remove a Custom Place
1 Make sure location mode is turned on and you are using either the High
accuracy or Battery saving setting.
2
From your Homescreen, tap
3 Find and tap Settings > Security > Smart Lock > Trusted places.
4
Select the place you want to remove.
5 Tap Delete.
Keeping Your Device Unlocked while You're Carrying It
Using the On-body detection feature, you can have your device stay unlocked when
you have it on you, for example, if you're carrying it in your hand, pocket, or bag. The
accelerometer in your device keeps your device unlocked when it senses that it's
being carried. The device locks when the accelerometer detects that the device has
been put down.
The On-body detection feature can't distinguish whose body is connected. If you give your
device to someone else while it's unlocked using On-body detection, your device may stay
unlocked for the other user. Keep in mind that On-body detection as a security feature is less
secure than a pattern, PIN, or password.
To Enable On-Body Detection
1
From your Homescreen, tap
2 Find and tap Settings > Security > Smart Lock > On-body detection.
3 Drag the slider beside Off to the right, then tap OK.
Using On-body Detection
When you use the On-body detection feature, you need to be aware of the following
behaviors:
This is an Internet version of this publication. © Print only for private use.
.
.
.
.
47