Linking To A Bluetooth Adapter In Hid Mode - Datalogic QuickScan QBT2400 Quick Reference Manual

Linking the Reader

Linking to a Bluetooth Adapter in HID mode

1. Install any drivers provided with the Bluetooth
adapter.
2. Scan the
3. Use the host computer's Bluetooth manager to
"Discover new devices" and select "Datalogic
Scanner." If you receive an error message, it may
be necessary to disable security on the device.
4. Use a text editor to see incoming data on the
port designated by the computer's Bluetooth
manager..
NOTE
12
Link to PC in HID
Link to PC in HID
The QBT2400 reader can be set up to require a
PIN code when connecting. If you want to set
up a PIN, or when adding new equipment to a
system that uses a custom security PIN, please
see the PRG for information.
label below..
QuickScan™ QBT2400