Open The Display - Panasonic CF-29 Series Reference Manual

Standby/Hibernation Functions
Using the Power Switch
Using the Display
• Closing or opening the display.
• Shutting down or restarting Windows.
• Entering either the standby or hibernation mode again.
When having entered the standby or hibernation mode using Fn key combinations or the
power switch, resume operation using the following procedure.
1
Slide the power switch (A).
When [Stand by] or [Hibernate] is selected as the setting for [When I close the lid of my
portable computer] ( page
1

Open the display.

Even if the display is closed after the computer has entered either the standby or
hibernation mode, operation will resume when the display is opened. If the
computer does not resume when the display is opened, press the power switch.
31), you can resume operation using the following procedure.
32