Standby/Hibernation Functions - Panasonic CF-29 Series Reference Manual

Standby/Hibernation Functions

Starting Up Your Computer Quickly
Differences between the Standby and Hibernation Functions
Entering the Standby or Hibernation Mode
If you use the standby or hibernation function, you can shut down the computer without
closing programs and documents. Upon restarting your computer from either the standby or
hibernation mode, you can immediately continue working in all programs, or documents that
were open at the time the computer was placed into standby or hibernation mode.
Function Where data is saved
to
Standby function Memory
Hibernation function Hard disk
NOTE
We recommend plugging in the AC adaptor if the standby function is to be used for a
long period of time. If the AC adaptor cannot be connected, we recommend that
hibernation mode be used instead of the standby mode.
If the standby or hibernation function is used repeatedly, the computer may not work
properly. To stabilize computer operations, shut down Windows on a regular basis
(about once a week) without using the standby or hibernation function.
Use any of the following methods to enter the standby or hibernation mode.
To use the hibernation mode, set [Power Options] in advance (
(Enabled in factory preset.)
Using Fn key combinations (
Using the power switch (
Using the display ( page
Time until recovery
Short
Rather long
page 6)
page 30)
32)
27
Requires power
supply
Yes
(if power is cut, all
data is lost)
Power is not required
to maintain data
page 28).