First Things First; Tools Required; Parts Packed With Your Unit; Before Mounting - GE Spacemaker 7-4235 User Manual

First Things First

Under Cabinet Mounting
EN
Instructions

Tools Required

• Drill and 1 / " Drill Bit
4
• Ruler or Tape Measure
• Nail or Awl
• Scissors
• Screwdriver - Phillips
• Countersink (Optional)
• Masking Tape
• Safety Glasses

Parts Packed with your Unit

Spacers
3 — 1 /
3 — 1 /
3 — 1"
USE:
3 — 2 3 / " Phillips head screws
4
or
5
3 — 1 / " Phillips head screws
8
1 — Mounting
template
1
Untitled-2
"
4
3 — Washers
"
2
2 — Cord hooks
Cut out on solid black line. Corte sobre la línea sólida negra.
If no overhang, front edge of templet
should be even with front edge of cabinet.
Si no hay una parte sobresaliente la parte
delantera de la plantilla debe ser igual con
el borde delantero del cabinete.
FRONT FRENTE
Fold guidelines for cabinet with overhang. Líneas de guía para ser dobladas en la parte sobresaliente de los gabinetes.
Model 2-4290 Cut out on solid black line. Corte sobre la línea sólida negra.
349A2708-0001 (Rev 0 E/S)
95-10
Printed in Singapore
3

Before Mounting

Empty contents of the selected cabinet under which
the unit will be mounted and thoroughly clean the
underside of the cabinet to remove any grease
residue which might be present.
We recommend the unit be mounted at the front
edge of the cabinet.
Important: For secure mounting, the screws must
go into the radio to a depth of at least
the overall length from the bottom of the cabinet
shelf to the bottom of the overhang is more than 1
3 / ", then a wood shim will be necessary. A shim can
4
be made from a sheet of plywood, using the
Template to locate the central lines for drilling the
1
/ " mounting holes. The shim can be located
4
between the cabinet shelf bottom and spacers.
Make sure the wood is at least as thick as the
excess over 1 3 / " If a shim is necessary, longer
4
screws are required. Longer screws (Type #10-32)
are available at most local hardware stores.
Cut out the Template on the line indicated. The
Template size and screw hole positions are identical
to the top of the clock radio.
3/5/03, 9:38 AM
3 / ". If
8