Sony HDR-GW55VE Service Manual page 42

Assembly-1: How to distinguish the side of Optical Filter Block
facing to Lens Device
This IR coated optical filter block has side A and side B.
When the optical filter block is exposed to fluorescent light at
a place where environmental light is blocked, side A glow red
and side B glow white at certain angles.
Install the optical filter block with side B facing toward the lens.
Optical Optical
Filter Filter
Block Block
Hold it with tweezers Hold it with tweezers
or the like. or the like.
[IR Cut Coated Side A] [IR Cut Coated Side B]
Lens Device side
Glow red at certain angles. Glow white at certain angles.
HDR-GW55VE/GW77/GW77E/GW77V/GW77VE_L2
Assembly-2: Screw tightening sequence when assembling these
parts.
Cabinet Bottom
2
1
Cabinet Bottom
Cabinet (F) Ornament Assy
Cabinet (F) Ornament Assy
2
1
Strength Plate (R)
1
Strength Plate (R)
2
Cabinet (R) Block
2 1
Cabinet (R) Block
1
2
3
3. ASSEMBLY
Heat Sink Plate
1
Heat Sink Plate
3
PS Plate
PS Plate
1
2
1
3
3-1E
5 6
4
2
2