Installing Software; Enabling Autoplay - HP Compaq Series Hardware And Software Manual

Multimedia

Installing Software

To install software from a CD included with the notebook:
1. Insert the software CD into the optical drive.
❏
❏
2. Select OK.
3. When the installation wizard is displayed, follow the
installation instructions on the screen.
4. Restart the notebook if prompted.
✎
Repeat the installation procedure for all software you want to
install.
✎
WinDVD Creator has special drive requirements for proper
installation. To install WinDVD Creator, refer to the instructions
provided with the InterVideo WinDVD Creator CD.

Enabling AutoPlay

AutoPlay is an option in Windows that turns the Autorun feature
on or off. Autorun starts a program or plays a title on a disc as
soon as it is inserted into the drive and the drive door is closed. By
default, AutoPlay is enabled on the notebook.
To disable AutoPlay or to enable AutoPlay if the feature has been
turned off, refer to your operating system documentation or visit
the Microsoft Web site at
4–10
If Autorun is enabled an installation wizard is displayed.
If Autorun is disabled, select Start > Run. Then enter:
x:\setup.exe
(where is your CD drive designation).
x
http://www.microsoft.com.
Hardware and Software Guide